|
| Troy Bodle
|
Mechanical Maintenance Training Specialist
Mr. Bodle has over 25 years of experience in mechanical maintenance professions. He is American Welding Society (AWS) certified in all position for pipe and structural welding. In addition he is a Federal Aviation Administration certified Airframe and Power plant Mechanic and Environmental Protection Agency certified Universal Refrigerant Technician. Retired as a US Army Chief Warrant Officer CW3. Mr. Bodle was responsible for the operational readiness of 64 combat aircraft, 128 aircraft maintenance personnel, 78 support personnel, and 31 civilian contract maintenance personnel. |
|
Bill Bustillos
|
Welding Specialist
Mr. Bustillos was employed by C.F.& I for 30 years and is certified Welding Inspector. He is retired from U.S. Naval Reserve as a Steelworker Chief. He has experience in X-ray weld on plate & pipe for government shipyards. Mr. Bustillos has 12 years of teaching experience as a Welding instructor for Trinadad Jr. College. He has been a Welding instructor at Pueblo Community College for the past 4 years. He has his teaching credentials for secondary and post-secondary instruction. |
| Jerry Geiger
|
Mechanical Maintenance Training Specialist
Mr.. Geiger has over 40 years of experience in the mechanical industrial field. Over the years he has worked closely with various community college technical programs as well as numbers of trade associations, including Scott Community College, Kirkwood Community College, Illowa Maintenance Council, Hawaii Transportation Association, Aloha Bus conference, Nebraska Maintenance Council , and before it ended, the diesel program at Southern Colorado State College. He holds a B.S. Degree in Industrial Technology Engineering with a minor in Diesel Technology from Colorado State University-Pueblo. He also holds an A.A.S. Diesel Mechanic. His recent work experience includes 15 years at Cummins, Inc. in various field technical support positions. |
| Larry Harmon
|
Electrical Maintenance Training Specialist
Mr.. Harmon has over 20 years of experience in the electrical field. He holds an Electronic Technician Diploma from DeVry Institute of Technology. His work experience includes working with GE Medical systems, Briggs & Stratton Corporation, Scitex America Corporation, and Diebold Corporation, where he specialized in alarm systems, ATM’s, and electrical maintenance. |
| Tom Jagunich
|
Electrical Maintenance Training Specialist
Mr. Jagunich has over 33 years experience in the areas of Electronics, Electro Mechanical, & Microelectronics Manufacturing. with an emphasis in Electro Magnetic Field. He holds an A.A.S. degree in Science from Hibbing State Jr. College and a B.S. degree in Electrical Engineering from the University of Minnesota. Mr. Jagunich has a broad background having worked at GPS Source, Aeroflex, Plasmon, Quantum and Sperry. He has two years experience as an Industrial Electricity trainer with PCC. |
|
Tom Kane
|
Engineering/Safety/Construction Technology Specialist
Mr. Kane has over 30 years experience in a variety of areas such as Civil Engineering, Construction, Safety, Computer Information Technology and AutoCAD design applications. He holds an AAS degree in Liberal Arts and Civil Engineering Technology, a B.S. degree in Occupational Education, from Southern Illinois University and a Masters Degree in Computer Information Technology from Webster University. He has also received certificates in AutoCAD 2000 Level I, II & III, Land Desktop Level I, and is NAIT certified as a Senior Industrial Technologist. Mr. Kane is also a certified construction and general industry safety outreach trainer. |
|
Arthur Malechek
|
Technology Education Specialist
Mr Malechek has over 39 years experience in manufacturing, process instructions, process improvements, job relations, and design. A graduate apprentice machinist, he holds a Bachelor of Science degree from Northern Illinois University. His experience in, and understanding of both, the manufacturing and design arenas provide a unique and ready source of knowledge from which students may draw. Art has extensive experience as a Producibility Engineer working for Texas Instruments, helping engineers in the Design for Manufacturability, Design for Assembly, and the correct application of GD&T on new product designs in accordance with the ASME Y14.5M standard. In addition to teaching courses in all areas of manufacturing, quality control, and human relations; Art draws on his vast manufacturing background to teach the 10 and 30 hour OSHA General Industry Outreach Safety courses. |
|