PCC > Academics > Areas of Study > Business & Technology > Technology > AutomotiveTechnology > Syllabi > ASE 231
COURSE SYLLABUS 1. TITLE OF COURSE: AUTOMOTIVE COMPUTERS PREFIX/NUMBER: ASE 231 CREDIT HOURS: 2 CR. (1L/1.5 LBV) 2. PREREQUISITE: None 3. RESOURCES NEEDED: TEXT: Automotive Technology SUPPLIES: Basic tools, DVOM, and uniform shirts 4. COURSE DESCRIPTION: Focuses on lecture and laboratory experiences in the inspection and testing of typical computerized engine control systems. 5. COURSE GOAL: 6. COURSE OBJECTIVES: By the end of the course, students will: (A) Locate and interpret vehicle identification numbers, labels and decals. (B) Practice recommended precautions when handling static sensitive devices. (C) Access and use electronic service information. (D) Obtain and interpret digital multimeter readings. (E) Inspect and test power and ground circuits and connections; service and replace as needed. (F) Retrieve and record stored OBD I and OBD II diagnostic codes, clear codes. (G) Diagnose the causes of emissions or drivability concerns resulting from failure of computerized engine controls with/without stored diagnostic trouble codes. (H) Inspect and test computerized engine control systems, powertrain control module (PCM), actuators and circuits; determine and perform necessary corrective action. (I) Diagnose drivability and emissions problems resulting from failures of interrelated systems (cruise control, security alarms, suspension controls, traction controls, A/C, automatic transmissions, non-OEM-installed accessories, and similar systems; determine necessary action. 7. EVALUATION PROCEDURES: (A) There will be a written exam after each unit and a final, during the 7½ week term, during class time, and on announced dates. All will be weighted equally, except the final will count double. (B) There may be unannounced “pop” quizzes throughout the 7½ week term, which will also be weighted equally to other exams. (C) Routine evaluations will be made on an individual basis by the instructor during each lab session. (D) There will be a lab final (performance) exam. The score on this exam will be entered twice (doubled) when computing your final grade. (E) Grading will be weighted--30% of your grade for written assignments, 40% of your grade for lab assignments, 30% of your grade for tests. One grade point value will be deducted from total grade percentage for every hour absent. Grading ScaleRaw Score Range Letter Grade 90 to 100 A 80 to 89 B 70 to 79 C 60 to 69 D 0 to 59 F Written Assignments30% Lab Assignments40% Tests30% Attendance10% 50/5050/3850/50 50/3850/5050/38 100/90100/70100/90 One point will be deducted from total grade percentage for each hour absent 150/138 150/126 300/250 Special Remarks: 1. All announced examinations will be made up of multiple choice, completion and short essay type questions and will be given during regular class periods. Make-up exams will only be given if prior arrangements have been made. 2. Attendance: College policy states that students may be dropped from enrollment when absent 20% of the scheduled class meetings. If enrolled from the beginning of the term, 15 hours will usually constitute 20% of a four-credit semester course which meets five hours per week. Reinstatement procedures are described in the PCC catalog. 3. Tardy Policy: A student who is late three times (enters classroom after the instructor has taken roll) will be charged with one full absence unless the student can provide valid reasons for one or more of these tardies. 4. Assignments/Missed Exams: It is the student's responsibility, whether present or absent, to obtain all material presented and to complete all course assignments. If prior arrangements are made or extenuating circumstances exist, makeup of tests may be allowed. Late homework papers will not be accepted unless those same extenuating circumstances exist. Makeup of quizzes is to be at the instructor's discretion. 8. COURSE OUTLINE: I. Unit I. Review of Electrical Fundamentals. Basic automotive microprocessors. Electronic control module operational theory and precautions (static discharge, voltage surges, welding, etc.) II. Unit II. Input Devices/Sensors; Output Devices/Actuators. Scanner use and trouble codes; flow charts and trouble trees. III. Unit III. Locating Factory and Aftermarket Service Information; Interpreting wiring diagrams; inspection and testing of sensors and sensor circuits (shorts, opens, grounds) using DVOM and scanners; inspection and testing of controls/actuators and their circuits using DVOM and scanners. IV. Unit IV. Comparison of major manufacturers (GM, Ford, Chrysler, Honda, etc.) Electronic engine control systems; terminology, functions, operational similarities and differences. A standardized procedure for diagnosis. 9. METHODS OF INSTRUCTION: To be successful in this course, students are expected to participate in discussions, readings, in-class writing, and peer review activities. The instructor may assign point values to such activities. 10. ACADEMIC INTEGRITY: The very nature of higher education requires that students adhere to accepted standards of academic integrity. Therefore, Pueblo Community College has adopted a policy of academic conduct as described in the Student Handbook. Violation of academic integrity may be defined to include the following: cheating, plagiarism, falsification and fabrication, abuse of academic materials, complicity in academic dishonesty, and personal misrepresentation. It is the student’s responsibility to be aware of the behaviors that constitute academic dishonesty. Sanctions for violating the standards of academic integrity may include warning, probation, suspension, and/or failure of the course or assignment at the discretion of the instructor. 11. ADA NOTICE: Students who have a documented disability may be eligible to receive accommodations for this class. Please contact the Disability Resources Center at 549-3446 for further information.
COURSE SYLLABUS
1.
TITLE OF COURSE:
AUTOMOTIVE COMPUTERS
PREFIX/NUMBER:
ASE 231
CREDIT HOURS:
2 CR. (1L/1.5 LBV)
2.
PREREQUISITE:
None
3.
RESOURCES NEEDED:
TEXT:
SUPPLIES:
Basic tools, DVOM, and uniform shirts
4.
COURSE DESCRIPTION:
Focuses on lecture and laboratory experiences in the inspection and testing of typical computerized engine control systems.
5.
COURSE GOAL:
6.
COURSE OBJECTIVES:
By the end of the course, students will:
(A)
Locate and interpret vehicle identification numbers, labels and decals.
7.
EVALUATION PROCEDURES:
(A) There will be a written exam after each unit and a final, during the 7½ week term, during class time, and on announced dates. All will be weighted equally, except the final will count double.
(B) There may be unannounced “pop” quizzes throughout the 7½ week term, which will also be weighted equally to other exams.
(C) Routine evaluations will be made on an individual basis by the instructor during each lab session.
(D) There will be a lab final (performance) exam. The score on this exam will be entered twice (doubled) when computing your final grade.
(E) Grading will be weighted--30% of your grade for written assignments, 40% of your grade for lab assignments, 30% of your grade for tests. One grade point value will be deducted from total grade percentage for every hour absent.
Grading ScaleRaw Score Range
Letter Grade
90 to 100
A
80 to 89
B
70 to 79
C
60 to 69
D
0 to 59
F
Written Assignments30%
Lab Assignments40%
Attendance10%
50/5050/3850/50
50/3850/5050/38
100/90100/70100/90
One point will be deducted from total grade percentage for each hour absent
150/138
150/126
300/250
Special Remarks:
All announced examinations will be made up of multiple choice, completion and short essay type questions and will be given during regular class periods. Make-up exams will only be given if prior arrangements have been made.
Attendance: College policy states that students may be dropped from enrollment when absent 20% of the scheduled class meetings. If enrolled from the beginning of the term, 15 hours will usually constitute 20% of a four-credit semester course which meets five hours per week. Reinstatement procedures are described in the PCC catalog.
Tardy Policy: A student who is late three times (enters classroom after the instructor has taken roll) will be charged with one full absence unless the student can provide valid reasons for one or more of these tardies.
Assignments/Missed Exams: It is the student's responsibility, whether present or absent, to obtain all material presented and to complete all course assignments. If prior arrangements are made or extenuating circumstances exist, makeup of tests may be allowed. Late homework papers will not be accepted unless those same extenuating circumstances exist. Makeup of quizzes is to be at the instructor's discretion.
8.
COURSE OUTLINE:
9.
METHODS OF INSTRUCTION:
To be successful in this course, students are expected to participate in discussions, readings, in-class writing, and peer review activities. The instructor may assign point values to such activities.
10.
ACADEMIC INTEGRITY:
The very nature of higher education requires that students adhere to accepted standards of academic integrity. Therefore, Pueblo Community College has adopted a policy of academic conduct as described in the Student Handbook. Violation of academic integrity may be defined to include the following: cheating, plagiarism, falsification and fabrication, abuse of academic materials, complicity in academic dishonesty, and personal misrepresentation. It is the student’s responsibility to be aware of the behaviors that constitute academic dishonesty. Sanctions for violating the standards of academic integrity may include warning, probation, suspension, and/or failure of the course or assignment at the discretion of the instructor.
11.
ADA NOTICE:
Students who have a documented disability may be eligible to receive accommodations for this class. Please contact the Disability Resources Center at 549-3446 for further information.