PCC > Academics > Areas of Study > Business & Technology > Technology > Auto Collision Tech > Syllabi > ACT 122
COURSE SYLLABUS 1. TITLE OF COURSE: PANEL REPAIR AND REPLACEMENTS PREFIX/NUMBER: ACT 122 CREDIT HOURS: 3 CR. (1L/3 LBV) 2. PREREQUISITE: None 3. RESOURCES NEEDED: TEXT: SUPPLIES: 1 spiral notebook, 3—no.2 pencils, 1 clipboard, work shoes, and basic hand tools 4. COURSE DESCRIPTION: Covers straightening techniques including tension pulls/stress relief, metal finishing, metal shrinking and use of fillers. Emphasizes the identification, handling and replacement of parts such as adjustment and alignment of bolt-on parts, fixed parts and accessories. Training covers the use of adhesives, sound deadeners and welding methods performed during repairs. 5. COURSE GOAL: To perform safely specific skills identified that are necessary for the removal and replacement of bolt on parts. 6. COURSE OBJECTIVES: After completion of this course, the student should be able to: (A) Determine the extent of direct and indirect damage and direction of impact; develop repair plan. (B) Inspect, remove and replace bolted, bonded, and welded steel panel or panel assemblies. (C) Determine the extent of damage to aluminum body panels; repair, weld or replace in accordance with manufacturer’s specifications. (D) Inspect, remove, replace, and align hood, hood hinges, and hood latch. (E) Inspect, remove, replace, and align deck lid, lid hinges, and lid latch. (F) Inspect, remove, replace, and align doors, tailgates, hatches, lift gates, latches, hinges, and related hardware. (G) Inspect, remove, replace, and align bumper bars, covers, reinforcement guards, isolators, and mounting hardware. (H) Inspect, remove, replace, and align front fender, headers, and other panels. (I) Straighten and rough-out contours of damaged panel to a surface condition for body filling or metal finishing using power tools, hand tools, and weld-on pull attachments. (J) Weld cracked or torn steel body panels; repair broken welds. (K) Restore corrosion protection. (L) Cut out damaged sections of sheet steel body panels and weld in replacements according to manufacturer/industry specifications. (M) Replace door skins according to manufacturer’s procedures. (N) Replace or repair rigid, semi-rigid, and flexible plastic panels according to manufacturer’s/industry specifications. (O) Restore sealers, sound deadeners, and foam fillers. (P) Perform panel bonding. (Q) Diagnose and repair water leaks, dust leaks, and wind noise. 7. EVALUATION PROCEDURES: Each student enrolled in the Automotive Collision program will be graded as follows: Lab skills attitude 1. Lab work consists of: (A) speed (B) accuracy (C) neatness and order (D) care of tools (E) attitude: student work habits, promptness, good attendance, project decision making. The ability to work without constant instruction. Responsibility to any given project or assignment. Laboratory projects will be evaluated on a weekly basis. Lab Skills 60% Written Assignments 20% Written Tests and Quizzes 20% Each hour of absence constitutes a deduction of one point from the total final grade. Tardiness will be counted in 15-minute increments. The student will be dropped when he/she misses over 12 hours. Grading ScaleRaw Score Range Letter Grade 100 to 93 A 92 to 85 B 84 to 77 C 76 to 69 D 68 to 0 F Special Remarks: 1. Regular attendance and class participation are of great importance for success in this Automotive Collision course. College attendance policy states that you may be dropped for absence of more than 20% of the scheduled class (12 hours). 2. No make up time will be allowed without prior approval from the instructor. It is the student’s responsibility to schedule any make up time needed. Students are expected to spend at least 1 to 2 hours of study time outside of class for each hour you are scheduled in class. 3. The PCC catalog for the year in which you started this program lists all academic policies, procedures, and requirements related to your enrollment and education. It is your responsibility to read, understand, and follow that catalog as it relates to you. 8. COURSE OUTLINE: I. Equipment/Safety II. Inventory/Identification of Automobile Parts III. Handling and Replacement of Automotive Parts IV. Adjustment and Alignment of Bolt On, Fixed, and Accessory Parts V. Use of Adhesives, Sound Deadeners VI. Selection of Welding Methods 9. ACADEMIC INTEGRITY: The very nature of higher education requires that students adhere to accepted standards of academic integrity. Therefore, Pueblo Community College has adopted a policy of academic conduct as described in the Student Handbook. Violation of academic integrity may be defined to include the following: cheating, plagiarism, falsification and fabrication, abuse of academic materials, complicity in academic dishonesty, and personal misrepresentation. It is the student’s responsibility to be aware of the behaviors that constitute academic dishonesty. Sanctions for violating the standards of academic integrity may include warning, probation, suspension, and/or failure of the course or assignment at the discretion of the instructor. 10. ADA NOTICE: Students who have a documented disability may be eligible to receive accommodations for this class. Please contact the Disability Resources Center at 549-3446 for further information.
COURSE SYLLABUS
RESOURCES NEEDED:
TEXT:
SUPPLIES:
COURSE DESCRIPTION:
Covers straightening techniques including tension pulls/stress relief, metal finishing, metal shrinking and use of fillers. Emphasizes the identification, handling and replacement of parts such as adjustment and alignment of bolt-on parts, fixed parts and accessories. Training covers the use of adhesives, sound deadeners and welding methods performed during repairs.
COURSE GOAL:
7.
EVALUATION PROCEDURES:
Each student enrolled in the Automotive Collision program will be graded as follows:
Lab skills attitude
1.
Lab work consists of:
(A)
speed
(B)
accuracy
(C)
neatness and order
(D)
care of tools
(E)
attitude: student work habits, promptness, good attendance, project decision making. The ability to work without constant instruction. Responsibility to any given project or assignment. Laboratory projects will be evaluated on a weekly basis.
Lab Skills
60%
Written Assignments
20%
Written Tests and Quizzes
Each hour of absence constitutes a deduction of one point from the total final grade. Tardiness will be counted in 15-minute increments. The student will be dropped when he/she misses over 12 hours.
Grading ScaleRaw Score Range
Letter Grade
100 to 93
A
92 to 85
B
84 to 77
C
76 to 69
D
68 to 0
F
Special Remarks:
Regular attendance and class participation are of great importance for success in this Automotive Collision course. College attendance policy states that you may be dropped for absence of more than 20% of the scheduled class (12 hours).
2.
No make up time will be allowed without prior approval from the instructor. It is the student’s responsibility to schedule any make up time needed. Students are expected to spend at least 1 to 2 hours of study time outside of class for each hour you are scheduled in class.
3.
The PCC catalog for the year in which you started this program lists all academic policies, procedures, and requirements related to your enrollment and education. It is your responsibility to read, understand, and follow that catalog as it relates to you.